Jason from Karekare, New Zealand May 2020 
I have 3 silverback scoop fatties . These have been kitted out with the bbshd 1000 Watt mid drive 52volt 14 amp. These bikes were built to gain access to 12km of  previously inaccessible beach at my local.
These bikes are tough and the terrain they conquer is incredible.  No problem riding through soft high tide sand.  Riding mostly on the beach in the harshest elements these require regular maintenance but the rewards far outweigh the work involved. 
Thanks luna mate you have changed my life and opened up my playground. 
200520203-copy.jpg
200520202-copy.jpg 200520201-copy.jpg
 
 
Matt from Canbera
Second conversion 
 
20200519-110912-1-.jpg
20200519-110921.jpg42 Tooth Chainring installed available here 
 
 
My spiel is:
Matt from Canberra
 
Had to fight the hordes of people lining up for early morning toilet paper to get this bike from Aldi, used a brake hone to slightly widen the bottom bracket, and had to file down the water bottle mounting bracket screws down to fit the battery onto the receiver. Things went pretty smoothly after that - A pretty fun building process in the end. 
Upgraded with a suspension seatpost and schwalbe marathon mtb 29er tyres
Before 
 
img-20200419-1056541.jpg

After Photos

 

img-20200515-095353.jpg

 

img-20200515-095248.jpg

Shaun from Perth Northern Suburbs 

 Shaun had no issues with the instalation, motor or battery. XT 10 speed, Lunamate ebike chain with high tensile pins with no issues. 52t Lekkie chainring 

Aftermarket XT rims with rear re built with DT Swiss Chsmpion spokes. Tyres Schwalbe Marathon Plus mtb 27.5
Suspension sestpost. Adjustable handle bar stem. Mudguards and paniers are waterproof Tioga
 
Bike built for commute to work 53km round trip. XT wheelset was more of a budget selection as they were mid range in price and next wheelset would be DT Swiss. Tyres selected for puncture protection, rode over 5000km with zero punctures and they roll pretty good for a mtb tyre--
 

 

150520201.jpg

150520203.jpg

Shane from Queensland, an example of a well thought out build on an old quality dual suspension ebike. 

 

"Giant Trance X2 2008, BBSHD 68mm with 52V 14aH battery. One spacer and a bit of dremel work was required to get it installed, otherwise it went i well.without any problems".
 
 
                                                                                       Before
14520202.jpg
 
 
 
                                                                            After 
 
14520201.jpg

 

Shane from Girrawheen Perth with this new Giant, BBSHD and 52 volt 13ah battery. 

 

img-3405-2-.jpg

 

Michael with his Norco Bigfoot 2, BBSHD 120mm kit and 52 volt 14ah battery. The bikes Bottom Bracket is 100mms but with the 5 inch tires for the motor to clear the chainstay the 120mm unit was required. 

 

norco-bigfoot2-fatbike.jpg

 

norco-bigfoot2-fatbike3.jpg

 

David from Wellington with his Giant Talon 2, (tubless setup) with the BBSHD, red Lekkie 42 tooth and 52 volt 17.5ah triangle battery. Awesome bike to convert. 

 

david-from-new-zealand.jpeg

 

 

Glen from Auckland with his BBSHD installed on his bike. 

 

img-20190711-124355.jpg

 

 

 

Rusty from Melbourne with his full suspension, BBSHD and mini battery 

 

20190223-124112.jpg

 

Adam from West Wallsend NSW Lynskey Pro 29 titanium frame Rohloff Hub 

BBSHD 52v 17.5ah Jumbo Shark 

 

20180911-164810-resized.jpg

image-2.png 

 2018 Giant Anthem, Size Small, BBSHD 100mm pressfit adapter installed Hubert, Mandurah, May, 2018

 

 

image-12783.jpg

Giant Trance, BBSHD 68mm, 48 volt Jumbo Shark, Sam, Bulimba Queensland, May 2018

paul923-205.jpg

Focus, Whistler, Large, BBSHD 68mm, 52 volt triangle Battery, Paul Miller.  Kalgoorlie, Western Australia , December 2017

 

 

te-anau.jpg

Specialized Roll, BBSHD 68mm, Sonya, Te Anau, New Zealand 

 

 

fat-3.jpg

Reid fat bike BBSHD, 120mm Lorrie, Swanview, Western Australia