Now includes a large triangle bag
Available in Australia only
This pack is made up of the most exciting (and expensive) battery cells on the market the which offers one of highest available capacity and power in an 18650 cell (3000mah) these cells are rated at 20amps which is powerful enough for almost all ebike applications. up to 140 amp draw for short busts
This cell may very well be the ultimate ebike battery pack building block because its both power dense (for long range) and very powerful .
Our cells are guaranteed to be authentic.
Read more about 18650 cell choice here: (breakdown on 18650 cells)
This is a high performance pack with our 100 amp continuous BMS with temperature protection built in. (read our article on BMS).This is a high performance pack designed to put out 3000 watts of power and bursts of up to 6000 watts. Even if your current set up does need this type of amperage it will not hurt your current set up to have this capability for future builds. Plus the high performance cell is designed to last longer than lower quality cells even under lesser amperage. Do not worry about having too many amps as your controller will only use them if it needs them so it's always better to have too many than not enough.
Every ingredient in this pack is top shelf from the cells, to the BMS, to the cell holders and nickel plates holding it together, to the xt-60 and xt-90 spark resistor connectors and our own volt meter built into the pack. All this comes together to be amazing pack for the price. We are very proud of our packs and the amazing price we are offering them for.
Luna Mate builds its packs with the finest BMS (battery management system) available so that you can plug in your battery and not worry about over charging. Your cells are automatically balanced by the internal BMS in the battery. Our BMS includes such features as temperature over heat protection and advanced cell balancing. These features not only get the maximum performance out of your bms they also keep your battery from getting to low, charging too high, or getting too hot and will automatically shut off your pack if it senses something is wrong. (read our article on BMS)
Regarding Amps: These packs will easily put out 90 amps (5000 watts) and even more for short bursts. If your kit can handle 72 volts, and needs 90 amps othen this is the ideal packs for you. In fact these packs will put out 140 amps for short bursts.
More than likely your controller is less than 50 amps and then you don't have to worry since your controller will only take from the battery what it needs. You cannot fry a controller by selecting a battery with too many amps. Voltage however, you need to be careful with.
Regarding voltage: This is a 20s (72 volt) battery. This means that with the same 48/72v controller you will get more power from the same amps, (first check that your controller is rated to 72 volts. A 72-volt battery puts out 84 volts when fully charged, otherwise you can fry your controller.
Most DIY controllers have a range of volts they will accept and most descent 48-volt controllers can handle 72 volts. This is something you must verify about your controller before ordering this battery.