Bafang Hydraulic and Disc Brake Sensors E-Brake (Pair)
Bafang Hydraulic and Disc Brake Sensors E-Brake (Pair)
Bafang Hydraulic and Disc Brake Sensors E-Brake (Pair)
Bafang Hydraulic and Disc Brake Sensors E-Brake (Pair)
  • Price is for pair 
  • Plug and Play into any bafang controller
  • Compatible with all BBSxx set ups
  • Transforms any brake levered based brake into an ebrake
  • Cuts power the second the brake lever is compressed
  • uses a magnet attached to your brake lever

 

 

Easily installed by plugging one end to your Bafang controller in the appropriate plug and the other end on the handle of your brakes.

See video instructions on how to install here: https://www.youtube.com/watch?v=dlvBxedXTZ8

Can also be used with mechanical disc brakes as well for those who want to use the Bafang stock ebrake handles.

 

Bafang Hydraulic and Disc Brake Sensors E-Brake (Pair)

USD $23.90 (exc tax)
USD $26.29 (inc tax)
( 2 Reviews )
Current stock: 0

2 Reviews

1/5
Mike 9th May 2017

The sensor that does not make sense.

I have Shimano 315 hydraulic brakes, it took ages to configure the magnet and sensor position - very sensitive to exact position by a quarter millimeter, the magnets and sensors only work through perpendicular vertical movement past the sensor head, large movement to activate so sensor only active once the brakes are full on so I am braking before motor cuts, sensor glue pads no longer sticky enough so holding sensor on with electrical tape, holding magnets on levers using electrical wire heatshrink, looks crappy and cheap, does not do the job properly, complete waste of money.

4/5
Mick 6th Dec 2016

Good little system

These brake cutoffs work perfect but can be a little be fussy to fit to some brakes. I have SRAM Guides and took me a lot of attempts and superglue to work out the best spot to mount the sensor and magnet. Check the forums for ideas, that helped me.

Add a Review