Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit
Bafang BBS01 250w 36v Kit

 Available Australia only

Programmed for 250 watts ( 25KM/H EN15194)

Kit includes: 

  • Bafang mid drive motor bottom bracket mounted (36 Volt Version)
  • Bottom bracket compatible with 68-73mm bottom brackets (most standard bikes)
  • Comes standard with 46 tooth chain wheel
  • Thumb throttle
  • Ebrake handles  which cut off the motor when depressed
  • 961 Display
  • 36 volt 15ah Panasonic Battery with PF cells. 555 Watt hours 
  • 36 volt 3 amp standard charger 
  • Everything you need to convert most bikes

This price is for knowledgeable builders and people willing to do their homework before they buy.  If you fix things on your own bike and like tinkering then this kit is fine for you. It is a plug and play kit with everything you need except the battery and charger. If you have not installed an ebike kit on a bike before we recommend that you read the installation manual before you make the decision to buy this drive unit. 

We are an Australian  company located in Perth. Many other people who offer this type of pricing are in China and the problem with China is the shipping costs tend to be very high (around $80 for the drive unit and much more for batteries). If you think it's expensive to receive something sent from China, wait until you try to send something back to China. When you buy an ebike product from a non-reputable vendor in China you are basically getting it without a warranty. 

  

Optional extras are: 

  • Under 5 kilos but packs a big punch
  • Programmed for 250 watts ( 25KM/H EN15194)
  • Affordable and powerful mid drive conversion kit
  • Turn almost any bike into a high-end mid drive ebike for a very affordable price

 

 

Which Bike?

The Bafang drive mounts in place of your current bike's bottom bracket and replaces your bike's crank set and front derailler if you have one. 

Your donor bike must have 68-73mm bottom bracket width. That means this kit will bolt onto almost any bicycle. But not fat bikes. We have the BBSHD which is 1000W nominal 1500W peak and will work with fat bikes 100-120mm bottom brackets BBSHD located here.

Many people have found that the Bafang can actually be mounted to many types of trikes, which can be fun since many trikes are not good candidates for hub motor kits.

 

Maybe you have an old donor bike laying around you want to convert, or maybe you are wide open to which bike to buy and install this kit on.

If you are also shopping for a bike to install this kit, that is perfect. We recommend you pick a bike that is known to be compatible with this drive and has no known issues. Ideally a build report has been written on our builder forum so that you can follow step by step someone elses building steps.

Here is a post on our builders forum  with a picture  collection with links to  build reports you can quickly  scroll through. 

 

 

Sprocket Options 

We offer the Bafang with 4 different options for tooth count on the chain wheel, 44/46/48/52 tooth.

Of course your gearing will also be determined by the rear cluster on the back of your bike. 

But you need to choose which of these 4 options you want up front.

44 tooth will give you the best performance for off road hill climbing.

46 tooth will give you the most reliable set up that is also very torquey and better for off road hill climbing.

48 tooth will give you the middle ground.

52 tooth will give you the highest top speed (30mph) but is only recommended for street riding and you should really take care not to overheat your controller when running this high by keeping your motor spending fast. 

Click here to read our special care & instructions guide

  

Luna Install Tool option

There are some proprietary nuts on the bottom bracket of the BBSHD that can be a little tricky to install without the right tool (still very easy to jerry rig something)

 However the Luna install wrench was made to make this task a snap and make taking on and off your drive easier in the future. 

 This is a $30 option.  Luna manufactures  this kit in their shop, and makes it affordable...the bafang install kit would cost anywhere from $65-$150 depending on which dealer you bought it from. 

 

 

Compatibility

The Bafang drive mounts in place of your current bike's bottom bracket and replaces your bike's crank set and front derailleur if you have one. 

Your donor bike must have 68-73mm bottom bracket width. That means this kit will bolt onto almost any bicycle. But not fat bikes. We have the BBSHD which is 1000W nominal 1500W peak and will work with fat bikes 100-120mm bottom brackets BBSHD located here.

Many people have found that the Bafang can actually be mounted to many types of trikes, which can be fun since many trikes are not good candidates for hub motor kits.

 

Bafang BBS01 250w 36v Kit

USD $797.27 (exc tax)
USD $877.00 (inc tax)
( 0 Reviews )
Current stock: 0

Choose Teeth Size *
Australian Batteries *
Choose Display *
Add a Charger at a Discounted Rate *
Luna Wrench
Add a Battery Skin - Free
Spacer Kit *
Add a socket tool at a reduced price

0 Reviews

Be the first to review this product.

Add a Review